MFE2 gear pump unit for fluid grease with main line automatic pressure relief
These units are designed for centralized lubrication systems used in conjunction with piston distributors (total-loss lubrication) and are equipped with the required relief and safety valves. The drive is provided by a three-phase motor. The pumps are located below the grease level, in contrast to oil units. Intermittent operation is required for the distributors’ sequence of operation: when the pump is running, the distributors are pressurized, when the pump is at rest, the main line is relieved of pressure and the distributors reverse. This work cycle is achieved by timing the electric motor.
The aggregates are optionally available with:
- Tank capacity: 3l or 6l made of plastic or metal(only for 6l)
- Voltage: Range I-II or III
- Monitoring:Level monitoring, level switch (empty signal)24V, 2x level switches (e.g. min and forward or min and max)
configurable.
Please note that self-configured units must be requested separately via our contact form.
These units contain all components required to supply your monofleece distributors with lubricants.
Our recommendation:
Flow rate | 0,2 ltr./min |
Fluid | fluid grease of NLGI Grades 000, 00. |
Tank capacity | 6 ltr. plastic |
Voltage | 207-254 V / 360-440 V, 50 Hz 249-305 V / 432-528 V, 60 Hz |
Monitoring | Fill Level switch 24 V |
Electrical connection | M12×1 plug connector |
Compact unit MFE2-KW3-2+299 for medium / large systems with up to 80 lubrication points (depending on cable length and cable diameter)also suitable for continuous operation.
Please configure your individual unit.
For an offer or an individual consultation please contact us under +49 (0)2336-474 6837 or use our contact form
Unfortunately there are no reviews yet. Be the first who rates this product.